Our crow waterproof roller blind is an ideal solution for bathrooms or kitchens where you are looking for a black coloured blind that can handle moisture in the air or even being splashed.
This product also lends itself to rented accommodation as it is so hard wearing and can be wiped clean if it gets dirty.
Sizing FAQ:
To order a recess size blind enter the wall to wall measurement at the smallest point of your window for for both width and drop. Our factory will make a small 0.5cm reduction to ensure your blind fits into this space.
An exact blind size is the finished blind size including brackets.
Fabric size is the size of the fabric part of the blind only. The finished blind will be 3.5cm wider than this to include for the brackets.
We will add enough fabric to the roll so that when the blind is fully extended the roller tube is still covered.
The fabric used is the same colour on both sides.
Please Note This blind is suitable for top fixing or face fixing only, it cannot be side fixed.
Blind Features:
Made on a rust free aluminium roller tube. As the size of your blind increases we will mount the blind on a larger diameter tube to ensure it doesnít bow.
Supplied with sidewinder mechanism for complete control which can be fitted on the left or right as you desire and is available in white plastic or nickel at no extra cost.
Supplied with a child safety clip for peace of mind.
Comes fully made to measure.
Measurements are in metric with width first followed by drop.
Fabric used is 100% PVC which is waterproof, blackout and inherently fire retardant making it the ideal material for use in bathrooms.
Safety and Fitting information: As members of the BBSA and Make It Safe Campaign we take child safety very seriously when making your blinds. We only use quality roller blind components such as aluminium tubes, metal brackets and Louvolite sidewinder mechanisms to assemble your blind. When it comes to the control chain we provide every roller blind that uses a chain with a tensioning safety device like the one shown in our gallery photo for peace of mind.
Fitting instructions for this made to measure roller blind can be downloaded by clicking here
Ordered this blind over emails, customer knowledge and service was fantastic. The blind itself was a perfect fit and very good quality. Can not fault anything from start to finish. Thank you.
Anonymous
Tuesday 16th March 2021
Over 250,000 Blinds Shipped
You Can Trust In Us For A Hassle-Free Experience With Quick And Easy Ordering, Fast Delivery And Professional Customer Care.
Please read the guide below and let us know which type of measurement you are providing:
Recess Size
If you want to fit your blind within the window recess as shown above, please provide us with Recess Size measurements.
To do this you will need to measure inside the window recess from wall to wall for the width and from ceiling to window sill for the drop.
You should take the measurements three times to make sure you get the most accurate sizes - at the top, at the middle and at the bottom for the width and at the top, the middle and the right for the drop.
The three sizes to give us are the smallest of the three measurements for both the width and the drop.
Make sure you do not make any reductions from these sizes yourself. We'll make your blinds slightly smaller on the width than the sizes you give us to make sure that it fits into the space with enough room for it to be installed easily and so the brackets don't scrape the walls, while still covering as much of the window as possible. The adjustment size will differ depending on the type of blind you choose and whether you are adding a cassette to cover the roll - our team will be happy to confirm the reduction amount for you if you advise which blind you are ordering.
Remember that the width of the fabric will always be slightly less than the total width of the blind to allow for the size of the mechanism and brackets - the difference is usually approximately 3.5cm.
Fabric Size or Blind Size
If you want to fit your blind outside of the window recess we recommend overlapping the window by at least 10cm on the width and 10cm on the drop.
You can then specify whether you want us to use these measurements as the Fabric Size or the Blind Size.
Fabric Size
If you choose Fabric Size we will use your measurements as the size of the fabric part of the blind only. This means that the size of the brackets/mechanism/cassette will be in addition to the sizes you provide us - this is usually 3.5cm but our team will be happy to confirm the amount for you before ordering.
Blind Size
If you choose Blind Size we will use your measurements as the size of the total blind including the brackets and mechanism (and cassette if ordered). This means that the fabric part of the blind will be slightly smaller than the sizes you provide. The amount of difference varies depending on the type of blind ordered - it is usually 3.5cm but our team will be happy to confirm the amount for you before ordering.
Help
Chain Colour Options
We offer a premium nickel chain as standard which offers smooth, precise control of your new roller blind.
Help
The control chain/cord for your blind can be on either the left or right side.
When deciding, consider whether you have any furniture that will make reaching the controls harder on a certain side; or if you are having multiple blinds in the same room whether you want them all on the same side or on opposite sides.
Roller Blind
Vertical Blind
Roman Blind
Help
Bottom Finish Options
Please read the guide below and select which bottom finish option you would like from the drop down menu:
Plain Bottom Finish
Our plain bottom finish features a sturdy folded and sewn bottom pocket with a weighted insert to ensure the blind hangs nicely.
Aluminium Bottom Bars
Alternatively you can choose to have the bottom of your blind finished with an aluminium bottom bar in a range of finishes.
White Curved Bottom Bar
Black Curved Bottom Bar
Anthracite Grey Curved Bottom Bar
Silver Curved Bottom Bar
Please Note - In July 2023 our bottom bar options changed from a round aluminium bar to the rectangular Gemini bottom bar with a sleek curved front and stylish angled end caps. If you ordered previously and want to check if your new product's bottom bars will match those on your previous order, please contact our team who will be able to confirm.
Help
Roll Direction
We offer a choice of roll direction on this blind as illustrated below:
Standard Roll
The fabric will roll off the back of the roller tube towards the window, so the backing of the fabric is visible.
Reverse Roll
The fabric will roll off the front of the roller tube towards the room, so the backing of the fabric is not visible.
Crow Black Bathroom Roller Blind
This is a made to measure product. Place your order now and it will be despatched on or before Tuesday 4th March