As a cool and calming colour, our Metal light grey sheer blind is an ideal choice for both modern and traditional homes. Pair with similar light colours to keep the calming feel, or with bold colours to give your living room or kitchen a modern feel.
Our range of sheer roller blinds are ideally suited to living rooms, kitchens and offices as a contemporary alternative to net curtains. Sheer blinds reduce glare from the sun and offer added privacy, making them the ideal solution for dressing behind curtains.
Ordering FAQ:
To order a recess size blind enter the wall to wall measurement at the smallest point of your window for width and drop. Our factory will make a small 0.5cm reduction to ensure your blind fits into this space.
An exact blind size is the finished blind size including brackets so the fabric will be approximately 3.5cm smaller than this width.
We will add enough fabric to the roll so that when the blind is fully extended the roller tube is still covered.
The fabric used is the same colour on both sides.
Please Note This blind is suitable for top fixing or face fixing only, it cannot be side fixed.
Blind Features:
Made on a rust free aluminium roller tube.
Supplied with sidewinder mechanism for complete control which can be fitted on the left or right as you desire.
Supplied with a child safety clip for peace of mind.
Comes fully made to measure.
Measurements are in metric with width first followed by drop.
Made from a sheer roller blind fabric which is 100% polyester
Sizing FAQ:
To order a recess size blind enter the wall to wall measurement at the smallest point of your window for for both width and drop. Our factory will make a small 0.5cm reduction to ensure your blind fits into this space.
An exact blind size is the finished blind size including brackets.
Fabric size is the size of the fabric part of the blind only. The finished blind will be 3.5cm wider than this to include for the brackets.
We will add enough fabric to the roll so that when the blind is fully extended the roller tube is still covered.
Safety and Fitting information: As members of the BBSA and Make It Safe Campaign we take child safety very seriously when making your blinds. We only use quality roller blind components such as aluminium tubes, metal brackets and Louvolite sidewinder mechanisms to assemble your blind. When it comes to the control chain we provide every roller blind that uses a chain with a tensioning safety device like the one shown in our gallery photo for peace of mind.
Fitting instructions for this made to measure roller blind can be downloaded by clicking here
I have ordered Perfectly Fit Blinds for the Garden door. It looks amazing, was relatively easy to setup. Overall I'm very pleased with this order.
Anonymous
Saturday 22nd March 2025
Excellent company,prices very reasonable,will order again
Ms Pauline Skinner
Friday 14th March 2025
Very easy ordering process. Just ensure you use a metal tape measure when calculating the width of blind required. Delivery took around 10 days which is fine as all orders are bespoke.
Quality of blind is excellent with little additions that make all the difference.
Mr Christopher Harris
Thursday 13th March 2025
Excellent service and blinds, it’s now the second time I have used this company.
Mrs Susan Taylor
Thursday 6th March 2025
Helpful, professional approach and very patient.
Mr Kenneth Dickey
Thursday 27th February 2025
Speedy delevery very well packed and fitted extremly well .
Patrick Milner
Thursday 27th February 2025
Absolutely brilliant! Fantastic blinds, great qualitly, look fab and easy to put up!
Sarah Hayes Mooney
Monday 24th February 2025
Fantastic quality and clear communication throughout. I purchased double blinds and they were easy to install. The free samples helped us choosing the right colour and material. I paid for mismeasurement insurance but luckily didn`t have to use it.
Peter Nagy
Thursday 30th January 2025
High quality blinds that fitted perfectly and arrived on time. Easy to install and they work really well.
Dr Justin Smith
Friday 17th January 2025
The blinds fitted perfectly and the instructions were clear and precise.
I love the blinds I ordered. Thank you so much.
My one and only criticism is not about the order, but I have since been bombarded with the advertising and offers. It’s a bit much.
Karen Ferguson
Friday 3rd January 2025
Hi Karen,
Thank you for your kind review! We’re thrilled to hear that you’re happy with your blinds and that the fitting process was smooth.
We do apologise for any inconvenience caused by the marketing communications, and we completely understand your concerns. We’ll certainly take your feedback on board and ensure we adjust the frequency of these messages.
If you ever need any further assistance, please don’t hesitate to reach out. Thanks again for your support!
Best,
The Order Blinds Team
Please read the guide below and let us know which type of measurement you are providing:
Recess Size
If you want to fit your blind within the window recess as shown above, please provide us with Recess Size measurements.
To do this you will need to measure inside the window recess from wall to wall for the width and from ceiling to window sill for the drop.
You should take the measurements three times to make sure you get the most accurate sizes - at the top, at the middle and at the bottom for the width and at the top, the middle and the right for the drop.
The three sizes to give us are the smallest of the three measurements for both the width and the drop.
Make sure you do not make any reductions from these sizes yourself. We'll make your blinds slightly smaller on the width than the sizes you give us to make sure that it fits into the space with enough room for it to be installed easily and so the brackets don't scrape the walls, while still covering as much of the window as possible. The adjustment size will differ depending on the type of blind you choose and whether you are adding a cassette to cover the roll - our team will be happy to confirm the reduction amount for you if you advise which blind you are ordering.
Remember that the width of the fabric will always be slightly less than the total width of the blind to allow for the size of the mechanism and brackets - the difference is usually approximately 3.5cm.
Fabric Size or Blind Size
If you want to fit your blind outside of the window recess we recommend overlapping the window by at least 10cm on the width and 10cm on the drop.
You can then specify whether you want us to use these measurements as the Fabric Size or the Blind Size.
Fabric Size
If you choose Fabric Size we will use your measurements as the size of the fabric part of the blind only. This means that the size of the brackets/mechanism/cassette will be in addition to the sizes you provide us - this is usually 3.5cm but our team will be happy to confirm the amount for you before ordering.
Blind Size
If you choose Blind Size we will use your measurements as the size of the total blind including the brackets and mechanism (and cassette if ordered). This means that the fabric part of the blind will be slightly smaller than the sizes you provide. The amount of difference varies depending on the type of blind ordered - it is usually 3.5cm but our team will be happy to confirm the amount for you before ordering.
Help
Chain Colour Options
We offer a premium nickel chain as standard which offers smooth, precise control of your new roller blind.
Help
The control chain/cord for your blind can be on either the left or right side.
When deciding, consider whether you have any furniture that will make reaching the controls harder on a certain side; or if you are having multiple blinds in the same room whether you want them all on the same side or on opposite sides.
Roller Blind
Vertical Blind
Roman Blind
Help
Roller Top Finish
'Standard' Roller System with Brackets & Covers
Our standard roller system allows the fabric roll, brackets and blind mechanism to be seen. They can be either top fixed or face fixed, but not side fixed. This is the most common system used and is the one you've probably seen around the most.
To give our system a premium finish we supply matching plastic bracket covers with our standard roller system at no additional cost. Just slip them over the metal bracket once its screwed into place for a neat, attractive finish.
You can choose from three colours for this system - white, black or anthracite grey.
Luxury Roller System
If you choose our luxury roller system we will supply you with a smart 7cm tall aluminium cassette that hides the top of the roll of fabric, the brackets and the blind mechanism. It also removes the gap you would usually see between the ceiling and the fabric roll giving a neater and more high end, contemporary finish. You can choose from three colours for this system - white, black or anthracite grey.
Unlike other fabric types, we are unable to offer a fabric insert in a sheer or sunscreen fabric as the lack of opacity means that the adhesive can be seen through the fabric.
The cassette can be either top fixed or face fixed depending where you are fitting your blind. Top fix is used when fitting your brackets at the top to the 'ceiling' area inside a recess; while face fixed is used when brackets are attached vertically on the wall for the cassette to clip into such as when you are fitting above a window outside of the recess.
The cassette is around 8cm deep, so please bear this in mind when deciding if its the best option for your space depending on how you will be fitting it. For example, if face fixing the cassette it will protrude from the wall by around 8cm, so its best to ensure there is nothing in the area that will clash with them such as a door.
Help
Bottom Finish Options
Please read the guide below and select which bottom finish option you would like from the drop down menu:
Plain Bottom Finish
Our plain bottom finish features a sturdy folded and sewn bottom pocket with a weighted insert to ensure the blind hangs nicely.
Aluminium Bottom Bars
Alternatively you can choose to have the bottom of your blind finished with an aluminium bottom bar in a range of finishes.
White Curved Bottom Bar
Black Curved Bottom Bar
Anthracite Grey Curved Bottom Bar
Silver Curved Bottom Bar
Please Note - In July 2023 our bottom bar options changed from a round aluminium bar to the rectangular Gemini bottom bar with a sleek curved front and stylish angled end caps. If you ordered previously and want to check if your new product's bottom bars will match those on your previous order, please contact our team who will be able to confirm.
Sheer Metal Roller Blind
This is a made to measure product. Place your order now and it will be despatched on or before Friday 4th April
